Posts Tagged ‘blade life’

Interview with Jeremy Soderburg

October 15th, 2010

0

Jeremy Soderburg

ONE caught up with Jeremy Soderburg for a BLADE LIFE story. See a small excerpt below and see the full story over at their page.

So, your “Fade Nation Green” section was off the hook. Do you think it’s your best section so far?
Thank you man. I like to think any section I put out is better than the last. That’s my goal at least. I am really happy with it. Usually when I film a section, I plan all the spots and I’m kind of in charge of what I’m trying to do. For green, I didn’t really plan anything. I just went wherever Lonnie would want to go, so it was nice for a change and I definitely skated stuff I don’t normally skate.

I know you’re juiced about your photo being published in the newest ONE issue. Was that a long time goal coming to life?
Yeah, I’m super happy about that. I grew up reading Daily Bread and most of the people I skated with were in it. So, since ONE took DB’s place, it is a big accomplishment for me.Jeremy Soderburg

Your parents seem really supportive of your skating, unlike most parents. I gathered that from pictures of you skating throughout the house. Oh, and your mom makes you wax?
My parents are dope. They’ve always supported everything I’ve ever done. My dad always drove me to skate spots, to watch competitions, and of course bought me skates. My mom is the more scared one, ha ha. But she is super supportive and yes, makes me wax, ha ha ha. She’s all into candles, so when she’s done with them or whatever she melts them into big blocks. I have a lifetime supply.

Lately I’ve noticed you’ve wanted to travel more. Where do you plan on going?
I would like to travel a little more. Me and a couple of other people are always talking about flying out to comps and what not, but it never goes through, ha ha. There’s nowhere in particular I’m trying to go really. I’ve always wanted to go to New York though, just ’cause I love that urban city life, but I don’t know how long I can stay away from LA.

Jeremy Soderburg

Via ONE


Andrew Nemiroski Interview

September 29th, 2010

0

ONE caught up with Andrew Nemiroski for a BLADE LIFE interview, see an excerpt below and read the full story over at their page.

Andrew, since this time I’m doing an interview WITH you as opposed to asking you to shoot photos for somebody else’s deal, let’s start with “Killin’ It.” Your DVD has been out for a little over six months now; what have some of the reactions been? How is it selling?

I sold all the books a couple of months ago and so far people have been digging it! I heard there is a “Killin’ It” review in the new issue of ONE, but I haven’t seen it yet. I’ll make another video in the future for sure though.

Now, you’re more into filming than photography, granted you have been making online edits for some time, but what made you want to make a full-on skate DVD?

Wasn’t feeling a lot of the online shit being posted and the Alien Workshop video “Mind Field” really got me inspired to make something with a photo/video collaboration.

Now, I’ve asked someone this question in the past but I kind of anticipated what he was going to say. Did you get into photography because of blading? Like, had you never strapped up a pair of skates, do you think you would have still heard the calling and picked up a camera?

Blading got me into blade photography, blade photography got me into flash photography, but I didn’t like doing it. If it weren’t for blading I probably would have still picked up a camera. I mostly shoot film now though. Most of the photos in “Killin’ It” weren’t even skate photos. Skate photography sometimes bores me.

Do you prefer filming as opposed to being filmed? Or is there some kind of equal love for both? Like, I get just as juiced writing about blading as I do actually blading, however, only one of them prevents me from getting fat.

It mostly depends on who I am filming. Some people are fun to film; some don’t really know what’s going on. The same goes with taking a photo. And it doesn’t even have to be a skate photo. Occasionally I find myself making art of other people to be awkward. Being filmed by someone who knows what they are doing and can freak the .3 is awesome though. Seems like AJ and Broskow have pretty much mastered filming together. I get more juiced when I land something than when I take a photo. Don’t get me wrong though, photos and videos are really fun, but skating is just way tighter.

Read the full story here


BLADE LIFE: Road to Popularity 2010

September 18th, 2010

0

Day 1
After an exhausting week of work filled with many sleepless nights, it was finally time to make the journey to the annual Popularity Contest in the province of trees, mountains, marijuana and environmental activists otherwise known as British Columbia. Jeremy Macht and I left the city of Calgary, Alberta, around noon, filling the car with as much camera and blading gear as possible. The original plan was to make it from Calgary to Kelowna in the least amount of time, and then Friday head up to Kamloops to meet with all our friends…

We made it to Kelowna by 5 p.m. local time and met up with Steve Eising, aka. Sleazy Beef, and Mike Eb at the infamous Ben Lee Skatepark. The Ben Lee Skatepark has a lot of history with Canadian rollerblading, being featured in a ton of old school videos and almost every SOL flick. Since it has played such a role in Canadian blading I really wanted to shoot some great photos there.

Jeremy Macht / Kindgrind

Mike Eb / FP to Back Full Torque

After our brief warm up, Jeremy wanted to Kind Grind the big park rail for our first photo of the night; without a trace of effort he laced it flawlessly. Since he had it dialled he insisted on getting a photo of an alley-oop fishbrain. First try: fail. Second try: stuck it and fell straight onto his wrist. It began swelling up instantly and almost buzz killed the session. Mike Eb, not deterred by Jer’s big fall, insisted on banging out one more photo on our way out of the park. With the second try Mike fastplanted to Back Full Torqued the rainbow ledge from end to end. Being the nice guy that he is, he did it a few more times until it was exactly how I wanted it—as it turns out I’m a perfectionist.

Read the full story over at ONE


BLADE LIFE: Interview with Thumper Nagasako

September 10th, 2010

0

Can you describe the differences in mindset between a street skater and a vert skater? Are there differences?

There is quite a big difference, but there are also similarities. They both take tons of practice, focus, athleticism and confidence. And I don’t think any aspect is better than the other.

I’ve found in my experience that vert takes a ton of repetition and endurance training. For example, you could spend years just practicing airs and the tricks you already know, and could go from am to pro just by the style and height at which you do your tricks. I found if I take time away from vert, it’s much harder coming back than to street. The endurance is lost quicker I think on vert. Vert also has a different culture, too. Still a rollerblading sort of mind set, just shifted in a different way. Less party oriented, I suppose. What I like on park and street is the variety and that there’s so many more people to skate with.

Read the full story at ONE


BLADE LIFE: An Interview with Conor Manweiler

August 13th, 2010

0

Have you had a chance to blade the USA yet? If so can you compare to Ireland and the scene in Ireland?

Yes, I was over in California years ago skating. There’s not too much in common between both scences. In Cali you have good weather, more shops, skate companies, skating distributors; there is more structure. Though I find here in Ireland it’s a tighter knit community.

When we started discussing this I accidentally said UK in an email to you when referencing, well, Ireland as part of the greater United Kingdom. You were not happy. Talk about the history of Irish rolling and why that reference is so grating.

Ireland became a Republic and left the British Commonwealth in 1949. A lot of people think Ireland is still part of the UK, it’s a common mistake. The Irish rolling scene started in the early ’90s. The first shops started selling skates in 1994. I remember going to a small skating competition, The Street Ball Challange, in St. Annes Park in 1995. My parents ran two small parks from 1997–2000, one in Clontarf and one in Larkhill. These times were the best here, a lot of rollers from all over Ireland came together and got to know each other. A shop called Primetime in Cork starting running the annual St. Patrick’s weekend comps. In 2001 we got our first indoor parks, Rampcity and Ramp n Rail. This was the same year as the first big street comp in Cork. Rolling has died down over and then flourished over the years. I’ve seen some great rollers quit and seen many new faces start. I guess it’s the same everywhere

You set out to make Kaltik with some very specific goals in mind. How do you think you guys are doing in that regard?

I believe the rollerblading community is only truly supported from within itself. I established Kaltik as a grassroots project, simply set out as a genuine skater owned and run company, to support rollerblading in Ireland and abroad. We sponsor and support skaters on our team from Ireland, Hungary, Scotland, USA, England, and the Czech Republic. We organize rollerblading events here in Ireland (namely the infamous St. Patrick’s Weekend Competition), street comps, Indoor Skate Jams, etc….

What have you learned during your run with the company?

Some things I would have never come across if I had never started Kaltik, the biggest being an understanding on how the “rolling industry” works and how only a small number of people who own distribution companies and retail shops have such big takes in “our” industry. It’s also opened my eyes to so many companies taking from the sport and not giving anything back into it.

Is there a fundamental flaw in frames or how most companies make them?

I won’t say there is any kind of fundamental flaw with any of the frames on the market. I’m not personally keen on how some companies put the same product on the market for 5 years or more and don’t make any adjustments or improvements with it.

How do you manage juggling your responsibility as a company owner with your needs as a skater?

Yeah, I have more stuff going on right now than ever before. The biggest responsibility was given to me when my son Callum was born on the 3/25/2010. Besides fatherhood, I’ve been so busy the past 8-9 months since I started to develop the new frame, I haven’t been able to get out as much to skate. I’m busier now than ever between being a father, the progress of Kaltik, skating, filming and looking after the production of our new team DVD. In January I also started to run an inline shop here in Dublin.

Read the full story and see all the shots at ONE